High-Precision Diamond Wire Cutting Systems for Structural Ceramic & Component Machining
Structural ceramic and zirconia component processing is indispensable in a wide variety of advanced manufacturing industries, where the demand for high-precision, complex-shaped ceramic parts can hardly be avoided. Typical end applications include mechanical engineering components, medical ceramic implants, industrial structural parts, as well as electronic ceramic substrates and high-temperature ceramic components.
The common task of the various cutting systems is to process hard, brittle ceramic materials with ultra-tight dimensional accuracy, to achieve minimal kerf loss and sub-surface damage via optimized wire tension control and precision tooling depending on the material, and to deliver finished parts ready for post-processing. This maximizes material yield and ensures the reliability of ceramic components in end applications. In order to make the whole production process cost-efficient and to create stable, high-quality output around the equipment, the diamond wire cutting systems used in the production lines must have high process stability and low maintenance requirements. We offer you the appropriate cutting solutions for this application, which at the same time comply with the latest industry standards for precision and performance
| SỐ. | Tham số | Thông số kỹ thuật |
| 1 | Mẫu | TCQF400LNC-FM-HL |
| 2 | Nguyên lý cắt | Dây kim cương vô tận / Cắt cơ học |
| 3 | Các chức năng cắt | Cắt lát / Cắt theo góc và hình dạng |
| 4 | Kích thước tối đa của phôi (mm) | Đường kính Φ600mm, Chiều cao 500mm |
| 5 | Kích thước bàn làm việc (mm) | Ø380 转台 |
| 6 | Độ chính xác về độ phẳng khi cắt (mm) | 0.08 |
| 7 | Độ nhám bề mặt (μm) | Ra 0,8 μm |
| 8 | Thông số kỹ thuật dây (mm) | Ø0,65–1,0/2580 |
| 9 | Hệ thống căng dây | Kiểm soát độ căng dây không đổi |
| 10 | Số lượng bánh dẫn hướng | 4 bánh xe |
| 11 | Động cơ truyền động | Động cơ servo |
| 12 | Tốc độ dây (m/s) | 51Max (Có thể điều chỉnh) |
| 13 | Tổng công suất (kW) | 2.8 |
| 14 | Điện áp | 220 V, 50 Hz |
| 15 | Hệ thống điều khiển | Hệ thống Tongcheng T32 được phát triển theo yêu cầu |
| 16 | Kích thước (Dài × Rộng × Cao) (mm) | 1350×1066×1968 |
| 17 | Trọng lượng tổng kg | 720 |
Temperature is easy to treat as a secondary variable in SiC wafer cutting. A machine may report stable wire speed, the coolant tank may remain
A diamond wire can continue moving long after it has stopped cutting economically. It may not be broken, alarms may remain clear, and the machine
Build a SiC wafer metrology control plan after diamond wire saw cutting, covering TTV, flatness, bow, warp, edge chips and subsurface damage.
See how 800 VDC AI data center power architectures change SiC wafer cutting, kerf control, surface damage limits and supplier qualification.
Build a practical SiC slicing cost model using kerf loss, yield, wire life, cycle time, finishing allowance and diamond wire saw data.
Learn how 200 mm SiC wafer slicing changes contact length, wire bow, coolant delivery, TTV control and diamond wire saw qualification.
