Будьте в курсе последних новостей благодаря инновациям, аналитическим материалам по отрасли и новостям компании от ewirexon. Фильтруйте новостные статьи по категориям в правом меню, чтобы найти именно то, что важно для вашего бизнеса.
Temperature is easy to treat as a secondary variable in SiC wafer cutting. A machine may report stable wire speed, the coolant tank may remain close to its setpoint, and the first wafers may look acceptable. Yet heat is being generated at thousands of short, intermittent contacts between diamond grains and silicon carbide. If that heat is not removed consistently,
A diamond wire can continue moving long after it has stopped cutting economically. It may not be broken, alarms may remain clear, and the machine may still complete every cycle. Meanwhile, feed force rises, cut time stretches, surface marks deepen and more downstream stock is needed to recover an acceptable wafer. Waiting for wire breakage makes replacement simple to define,
Build a SiC wafer metrology control plan after diamond wire saw cutting, covering TTV, flatness, bow, warp, edge chips and subsurface damage.
See how 800 VDC AI data center power architectures change SiC wafer cutting, kerf control, surface damage limits and supplier qualification.
Build a practical SiC slicing cost model using kerf loss, yield, wire life, cycle time, finishing allowance and diamond wire saw data.
Learn how 200 mm SiC wafer slicing changes contact length, wire bow, coolant delivery, TTV control and diamond wire saw qualification.
