Advanced Processing Systems for New-type Functional Material Manufacturing
New-type functional materials (composites, 2D materials, energy storage materials) drive cutting-edge industries like new energy and semiconductors. Precision processing unlocks their unique properties, directly determining device performance. Diamond wire cutting is the key technology, offering ultra-low damage and wide compatibility.
In R&D and production, diamond wire systems perform ultra-fine slicing, ensuring minimal subsurface damage and micron-level accuracy. Flexible configurations support both lab prototyping and mass production, adapting to evolving material needs.
Our systems deliver ultra-low damage cutting to protect material performance, high precision for micro-components, and wide material compatibility, supporting next-generation new energy and semiconductor technologies.
Our diamond wire cutting systems support high-efficiency, high-precision processing of a wide range of new-type functional materials, including composite materials, biomaterials, 2D materials, energy storage materials, and special structural materials. With ultra-fine cutting capability and low-damage processing characteristics, they meet the strict requirements of R&D prototypes and small-batch trial production as well as large-scale mass production.
| 不. | 参数 | 规格 |
| 1 | 模型 | （可自定义，例如 EW-200） |
| 2 | 切割原理 | 金刚线机械冷切割 |
| 3 | 切割功能 | 切片 |
| 4 | 工件最大尺寸（长×宽×高） | 150 × 150 × 150 毫米 |
| 5 | 工作台尺寸（长×宽） | 160 × 160 毫米 |
| 6 | 切割平整度精度 | ≤ 0.1 毫米 |
| 7 | 表面粗糙度 | Ra 0.8 μm |
| 8 | 金刚石线规格 | Φ0.5 × 1797 毫米（直径范围：0.35~0.8 毫米） |
| 9 | 张力系统 | 伺服张力控制 |
| 10 | 导轮数量 | 3个轮子 |
| 11 | 驱动电机 | 定制伺服电机 |
| 12 | 主轴转速 | 4500 转/分 |
| 13 | 主电机功率 | 1.1 千瓦 |
| 14 | 总功耗 | 1.5 千瓦 |
| 15 | 电源 | 220 V / 50 Hz |
| 16 | 控制系统 | 自主研发的通城T30 |
| 17 | 占地面积（长×宽×高） | 约 850 × 800 × 950 毫米 |
| 18 | 毛重 | 约560千克 |
Temperature is easy to treat as a secondary variable in SiC wafer cutting. A machine may report stable wire speed, the coolant tank may remain
A diamond wire can continue moving long after it has stopped cutting economically. It may not be broken, alarms may remain clear, and the machine
Build a SiC wafer metrology control plan after diamond wire saw cutting, covering TTV, flatness, bow, warp, edge chips and subsurface damage.
See how 800 VDC AI data center power architectures change SiC wafer cutting, kerf control, surface damage limits and supplier qualification.
Build a practical SiC slicing cost model using kerf loss, yield, wire life, cycle time, finishing allowance and diamond wire saw data.
Learn how 200 mm SiC wafer slicing changes contact length, wire bow, coolant delivery, TTV control and diamond wire saw qualification.
